S2130
特点
● 可冲孔加工，钻孔加工钻头使用寿命可延长
● 优异的电性能
● PTH可靠性与FR-4.0相当
● 不具备UV阻挡功能
应用领域
● 仪器仪表、信息家电、汽车电子、自动控制器、游戏机等
● 对于具有CAF要求的应用，建议客户对其可靠性进行系统评估。
- 产品性能
- 产品证书
- 资料下载
| Items | Method | Condition | Unit | Typical Value | |
|---|---|---|---|---|---|
| Tg | IPC-TM-650 2.4.25 | DSC | ℃ | 130 | |
| Td | IPC-TM-650 2.4.24.6 | 5% wt. loss | ℃ | — | |
| CTE (Z-axis) | IPC-TM-650 2.4.24 | Before Tg | ppm/℃ | 60 | |
| After Tg | ppm/℃ | 340 | |||
| 50-260℃ | % | 5.2 | |||
| Thermal Stress | IPC-TM-650 2.4.13.1 | 288℃, solder dip | s | >30 | |
| Volume Resistivity | IPC-TM-650 2.5.17.1 | After moisture resistance | MΩ.cm | 2.9 x 108 | |
| E-24/125 | MΩ.cm | 8.6 x 106 | |||
| Surface Resistivity | IPC-TM-650 2.5.17.1 | After moisture resistance | MΩ | 2.8 x 107 | |
| E-24/125 | MΩ | 4.8 x 106 | |||
| Arc Resistance | IPC-TM-650 2.5.1 | D-48/50+D-4/23 | s | 115 | |
| Dielectric Breakdown | IPC-TM-650 2.5.6 | D-48/50+D-4/23 | kV | >45 | |
| Dissipation Constant (Dk) | IPC-TM-650 2.5.5.9 | 1MHz | -- | 4.6 | |
|
|
|
|
|||
| Dissipation Factor (Df) | IPC-TM-650 2.5.5.9 | 1MHz | -- | 0.016 | |
|
|
|
|
|
||
| Peel Strength(1Oz HTE copper foil) | IPC-TM-650 2.4.8 | A | N/mm | — | |
| After thermal Stress 288℃,10s | N/mm | 1.9 | |||
| 125℃ | N/mm | 1.7 | |||
| Flexural Strength | LW | IPC-TM-650 2.4.4 | A | MPa | 400 |
| CW | IPC-TM-650 2.4.4 | A | MPa | 320 | |
| Water Absorption | IPC-TM-650 2.6.2.1 | E-1/105+D-24/23 | % | 0.11 | |
| CTI | IEC60112 | A | Rating | PLC 3 | |
| Flammability | UL94 | C-48/23/50 | Rating | V-0 | |
| E-24/125 | Rating | V-0 | |||
Remarks:
1. Specification sheet: IPC-4101/12, is for your reference only.
2. All the typical value is based on the 1.6mm specimen.
3. All thetypical values listed above are for your reference only and not intended forspecification. Please contact Shengyi Technology Co., Ltd. for detailedinformation. All rights from this data sheet are reserved by Shengyi TechnologyCo., Ltd.
Explanation:C=Humidity conditioning, D=Immersion conditioning in distilled water,E=Temperature conditioning
Thefirst digit following the letter indicates the duration of preconditioning inhours, the second digit the preconditioning temperature in ℃ andthe third digit the relative humidity.