产品与市场
ST110G
特点
● 优越散热性能
● 优良的耐热性及可靠性
● 较低 Z-axis CTE
应用领域
● PCB散热解决方案
● 汽车电子
● DC/ DC逆变器等
- 产品性能
- 产品证书
- 资料下载
| Items | Method | Condition | Unit | Typical Value |
|---|---|---|---|---|
| Thermal Conductivity | ASTM-D5470 | A | W/ (m?K) | 1.0 |
| Tg | 2.4.25D | DMA | ℃ | 175 |
|
Td |
2.4.24.6 | Wt 5% loss | ℃ | 400 |
| Thermal Stress | 2.4.13.1 | 288℃, solder float | s | 300 |
| T288 |
2.4.24.1 |
TMA |
min |
60 |
| CTE (Z-axis) | 2.4.24 | Before Tg | ppm/℃ | 27 |
| After Tg | ppm/℃ | 176 | ||
| 50-260℃ | % | 1.8 | ||
| Volume Resistivity | 2.5.17.1 | C-96/35/90 | MΩ/cm | 1.4x109 |
|
Surface Resistivity |
2.5.17.1 |
C-96/35/90 | MΩ |
1.5x107 |
| Dielectric Breakdown | 2.5.6 | D-48/50+D-0.5/23 | kV | >45 |
| Peel Strength (1oz HTE) | 2.4.8 | 288℃/10s | N/mm | 1.15 |
|
Flammability |
UL94 |
C-48/23/50 |
Rating |
V-0 |
| Water Absorption |
IPC-TM-650 2.6.2.1 |
E-1/105+D-24/23 | % | 0.10 |
Remarks:
1. All the typical value is based onthe 0.5mm specimen(5x106). The Value of water absorption andCTE(Z-axis) is based on the 2.0mm（15x2116）.
2. All the typical values listed above arefor your reference only and not intended for specification. Please contactShengyi Technology Co., Ltd. for detailed information. All rights from thisdata sheet are reserved by Shengyi Technology Co., Ltd.
3. UL certificated Single/Double sidePCB min. thickness 0.38mm.
Explanation:C=Humidity conditioning, D=Immersion conditioning in distilled water,E=Temperature conditioning
The first digit following the letterindicates the duration of preconditioning in hours, the second digit thepreconditioning temperature in ℃ and the third digit the relativehumidity.